The Universal Wrap is a hybrid cover that combines plush, premium quality 100% genuine sheepskin where you need it, on the face of the seat where you’re sitting, with synthetic fleece acrylic rounding out the seat bottom. The result is a cost-effective way to enjoy the benefits of real sheepskin while protecting your seats.
Note: Sheepskin is a natural product and variances in texture, density and color can occur. We recommend ordering all sheepskin products at the same time in order to guarantee an exact match. Customers who order at different times may see variations.
Benefits
- Sheepskin is the absolute finest material for regulating body temperature - cozy in winter and cool in summer
- Enjoy a far more pleasurable and comfortable driving experience
- Upgrade the appearance of vehicle's interior with a premium look
- Protect car seats from wear and tear
- Preserve vehicle's resale value by keeping seats looking new
- Rejuvenate older or damaged seats to make them look new again
- Less expensive than reupholstering seats
Recommended For
- Owners looking to drastically improve the comfort of their driving experience
- Drivers who want to add a premium touch to their vehicle
- New vehicle owners
- Vehicles with interiors that need a "makeover"
Need help deciding which sheepskin seat cover is the right one for you?
See our side-by-side sheepskin seat cover comparison chart
Make Your Ride More Comfortable
- Never too hot or too cold, sheepskin maintains a steady body temperature all year round - it's thermostatic quality permits air flow between its natural hollow fibers allowing it to “breathe”, producing a cooling effect in summer by wicking heat and sweat away from the body. In winter the hollow fibers trap body heat, creating an insulating effect that keeps you warm but never too hot
- Fully compatible with heated seats, warmth will penetrate through
- Dense fleece adds cushion to hard or uncomfortable seats
Superior Seat Protection
- Eliminate the usual wear and tear on seats from getting in and out of vehicle
- Water resistant
- Block dangerous UV rays from fading, discoloring and cracking seats
- Stop dye transfer from blue jeans to seats (Black sheepskin)
- Protect seats from indentations caused by heavy objects
- Prevent accidental punctures from sharp objects
- Backed with a soft lining that prevents seat cover from creating scuff marks on seats
Long Lasting Durability
- Fire and burn resistant, prevent cigarette burns on seats
- Stain resistant, coffee and soft drink spills are easily cleaned
- Tear resistant, sheepskin is extremely durable
- Expected lifespan of 6-8 years when cared for properly
Materials and Workmanship
- Cost effective "hybrid" design seat cover: Made of genuine sheepskin where your body comes in contact with seat and utilizes synthetic fleece acrylic around sides of seat bottom
- Sheepskin portion cut from solid pelts (large sections are not pieced together)
- Rugged 800 denier nylon straps/plastic buckles and durable elastic straps/metal hooks hold seat cover securely in place
- Built-to-last, heavy-duty 3-strand polyester threading that will not break or unravel
- Sturdy elastic binding around the inside edges holds cover snuggly to the seat
- Lined with ¼" foam padding
- Anti-slip rubber backing
About Our Sheepskins
- We use only the finest, 100% genuine grade-A premium Merino sheepskin from Australia or New Zealand
- Dense fleece measures approximately 1" deep (25mm)
- Will not shed, even after many years (when new, slight shedding may occur along seams which will stop over time)
- Stain resistant due to the naturally occurring oils in sheepskin
- Hypoallergenic, will not cause irritation or allergic reactions
- Will not smell bad, any light odor will dissapate over time
- Curly wool available upon request
Seat Coverage Area
- Built-in headrest cover can be installed either over headrest (covering headrest, as in photos) or under headrest (leaving headrest visible)
- Front of backrest and entire seat bottom is covered, sides and back side of backrest are uncovered; controls on seat bottom are left open (cover tucks between seat cushion and plastic molding) map pocket on back side of seat's backrest is generally accessible (horizontal strap that holds cover in place can be shifted up or down if needed to allow access)
Air Bag Safety
Colors
- Our colors are designed to look great in any vehicle, regardless of vehicle manufacturer
- We cannot guarantee that the color ordered will match your interior, even if the vehicle's VIN is provided
- For customers who provide a photo we will gladly offer our opinion on which color is the best match
- Colors are generally fade resistant and should last many years
- Fading is less likely to occur in vehicles that are not continually exposed to direct sunlight and with lighter colors
- Strap color matches color of sheepskin
Care and Cleaning
- Light brushing of sheepskin portion with a wire dog brush and vacuuming will keep them fluffy if they get matted down
- Febreeze or similar can be used safely
- Scotchgard can be safely applied, however it is not necessary due to the natural stain resistance of sheepskin
- Spot clean with water and mild soap
- If a drink spills on them, blot up as much liquid as possible and allow to air dry
- For deep cleaning, sheepskin can be dry cleaned; never put sheepskin in washer or dryer!
In The Box
- Seat cover for low back bucket seat, built-in headrest cover can be installed either over or under headrest; each seat cover consists of one single piece (backrest and seat bottom portion are sewn together); sold as singles
Product SKU
Shipping and Delivery Times
- Allow up to 5 business days for order processing
- All orders ship from our warehouses in Southern California, USA
- We use UPS Ground service for most orders and delivery can take 1-5 business days to arrive, depending on delivery address distance from Southern California
- You will receive a tracking number via email after your order is shipped
Returns
- Universal Wrap sheepskin seat covers are fully returnable and refundable for up to 30 days from shipment date; see our full return policy for details
Warranty
- 1 year warranty against defects in workmanship and materials; excludes normal wear and tear, color fading, accidental damage or damage due to improper installation or use
All product images are for illustrative purposes only and may differ from the final product. Actual color can be affected by how dye takes to individual skins when tanned and dye lot changes by the tanneries we source our skins from. We feel our photos are an excellent representation of our colors, however viewing conditions such as monitor settings and ambient lighting can affect how they appear to a customer. Samples are available for a small, refundable fee.
(Only registered customers can rate)
Note: These instructions are general guidelines for the installation of sheepskin seat covers. Due to the wide variety of seat styles, actual installation steps may vary.
Step 1
Lowback seats with removable headrests - Remove headrest completely from seat
Lowback seats with non-removable headrests - Your seat cover will have a velcro strip that must be pulled apart and slipped over headrest
Highback seats with integrated headrests - The seat cover will slip over the whole seat
Step 2
Recline the backrest portion of your seat, fitting cap over top of seat.
Step 3
Take the three straps in center seam of seat cover and pull them (tugging hard) through the break between the seat and backrest. If seat does not allow for center break strap to be pulled through, cut that strap off.
Step 4
Take the front corners of seat cover (in sitting position) and turn them inside out and place them on the seat corners. Keeping seam of seat cover lined up with seam of vehicle's seat, turn (fold) cover back to normal by working your way to center of seat from either corner.
Step 5
Bring backrest upright and tuck in all excess sheepskin into break of seat. (If seat is designed with bottom molding, tuck in excess side skirts of seat cover inside plastic molding).
Step 6
Take shorter center strap and attach to any portion under the seat. Attach metal hooks on long outside straps (one at a time) to hole in white fitting rod provided. Pull rod through under seat to the front.
Step 7
Unclip hooks from fitting rod and connect to 'D' rings located on the front of the seat cover. If 'D' rings are not present, attach elsewhere, avoiding electrical wires.
Step 8
Take remaining straps found on side panels of upper half and lower half of cover and fasten to any attachment under seat. Do not attach to electrical wires.
Step 9
For lowback seats only (seats with an adjustable headrest). You should now have a snug fit and be ready to replace headrests. After locating position of headrest shafts, use a sharp instrument to pierce cover, cutting a small slit from front to back and side to side. Insert headrest poles through cover and into the headrest shafts.