Pre-made Custom Fit for an Exact Fit
Our ExactFit Leatherette Seat Covers are premade to the custom-fit specifications of your vehicle's seats and fit perfectly, just like a glove. And because they're a ready-made, off-the-shelf cover and not made to order, they're less expensive than custom made, there's no delay for manufacturing time and are fully returnable.
Exclusively available for a limited selection of vehicles only.
Benefits
- Protect car seats from wear and tear
- Preserve vehicle's resale value by keeping seats looking new
- Experience the look and feel of leather without the cost
- Upgrade the appearance of cloth seats with a sporty look
- Rejuvenate older or damaged seats to make them look new again
- Less expensive than reupholstering seats
Recommended For
- New vehicle owners
- Vehicles with interiors that need a "makeover"
- Active lifestyle enthusiasts who get in the car sweaty, wet or dirty
- Parents with small children, especially kids in car seats
Superior Seat Protection
- Eliminate the usual wear and tear on seats from getting in and out of vehicle
- Water resistant
- Block dangerous UV rays from fading, discoloring and cracking seats
- Stop dye transfer from blue jeans to seats (Black leatherette)
- Lined with ¼" memory foam padding that protects seats from indentations, such as from baby's car seat
- Prevent accidental punctures from sharp objects
- Backed with a soft felt lining that prevents seat cover from creating scuff marks on seats
Make Your Ride More Comfortable
- Luxurious leather-like feel
- Micro-perforated center inserts for compatibility with heated and air-conditioned seats
- ¼" memory foam padding provides cushioning to make hard seats tolerable
Long Lasting Durability
- Stain and tear resistant
- Fire and burn resistant
- Color will not fade or change in the sun
- Expected lifespan of 8-10 years
Features
- Stunning "topstitch" design with threading visible
- Map pocket built into back side of backrest
Materials and Workmanship
- Fully synthetic faux leather construction, made of polyurethane (PU) and contains no animal by-products (vegan)
- Comprised of 3 layers of material: outer facing leatherette, ¼” memory foam and a soft felt backing
- Rugged 800 denier nylon straps and buckles keep the seat bottom portion securely in place
- Built-to-last, heavy-duty 3-strand polyester threading that will not break or unravel
Seat Coverage Area
- Front row seats - Front, sides and entire back side of the back rest are covered; controls on seat bottom are left open (cover tucks between seat cushion and plastic molding)
- Back row / Middle row bench seat - Seat backrest and seat bottom portions are covered; center console/armrest in backrest will be accessible; split benches sections will be able to fold down independently
Air Bag Safety
- Absolutely all our seat covers are 100% seat side air bag compatible
- Inside the backrest portion of the cover and along the side facing the outside of the vehicle, we use either velcro, breakaway stitching or openings/slots that allow for the free movement of seat side airbags in the event of deployment
- See our side airbag deployment demonstration video
Colors
- Our colors are designed to look great in any vehicle, regardless of vehicle manufacturer
- We cannot guarantee that the color ordered will match your interior, even if the vehicle's VIN is provided
- For customers who provide a photo we will gladly offer our opinion on which color is the best match
Care and Cleaning
- Easy clean up by just wiping down with a damp cloth, Simple Green or leather cleaner for car interiors
In The Box
- Front row seats - Two seat covers for front low back bucket seats, one for driver side and one for passenger side; each cover consists of 3 separate pieces: one for the backrest, one for the seat bottom and one for the headrest; matching console lid cover also included if applicable (does not apply to vehicles with 40/20/40 seat configurations)
- Back row / Middle row bench seat - Cover consists of either 2 or 3 sections, one for seat bottom and one for backrest portion (or two for split benches); 3 headrest covers included
Product SKU
- Varies by vehicle - CSF001, CSF002, CSF003, CSB002, CSR003, FFF001, FFB001, HC01, HC02, TC01, TC02, TS001, CORVETTE001
ExactFit covers are made to the exact specifications of your vehicle's seats. Since they are pre-made and not custom made to order, they are returnable. Learn more about fit options
Front Row Fit Details
- Rugged 800 denier nylon straps and buckles keep the seat bottom portion securely in place and will not slip, slide or leave markings on seat when installed correctly
- Straps will not affect power seat motor function or electronics underneath seat bottom when installed properly
Back Row / Middle Row Bench Fit Details
- Rugged 800 denier nylon straps and buckles keep cover securely in place and will not slip, slide or leave markings on seat when installed correctly
- Center console/armrest in backrest will be accessible
- Split benches sections will be able to fold down independently
General Information
- All our covers are "slip-on covers" designed to go directly over your seats
- No need to remove existing upholstery of seat
- No special tools needed
- Yes, you can install them yourself
- See our installation instructions and videos for details
Front Row Seat Cover Installation
- No need to remove seats from vehicle
- No need to remove headrests from seats
- Installation generally takes 20-30 minutes per cover
- Note for elderly or physically challenged customers - Installation requires reaching under the seat, feeding straps through potentially tight gaps, tucking cover into tight crevices and being on knees outside vehicle. We recommend inspecting your seat before ordering to determine if you are able to perform these tasks or if you will need to seek assistance from a friend, family member or an upholstery shop
Back Row / Middle Row Bench Seat Cover Installation
- Removal of the back seat and headrests is generally required in order to install
Shipping and Delivery Times
- Allow 3-4 business days for order processing
- All orders ship from our warehouses in Southern California, USA
- We use UPS Ground service for most orders and delivery can take 1-5 business days to arrive, depending on delivery address distance from Southern California
- You will receive a tracking number via email after your order is shipped
Returns
- All ExactFit series seat covers are fully returnable and refundable up to 30 days from shipment date; see our full return policy for details
Warranty
- 1 year warranty against defects in workmanship and materials; excludes normal wear and tear, accidental damage or damage due to improper installation or use
(Only registered customers can rate)
There are no comments for this product.
Note: These instructions are general seat cover installation guidelines. Due to the wide variety of seat styles, actual installation steps may vary.
Step 1
Lowback seats with removable headrests - Remove headrest completely from seat
Lowback seats with non-removable headrests - Your seat cover will have a velcro strip that must be pulled apart and slipped over headrest
Highback seats with integrated headrests - The seat cover will slip over the whole seat
Step 2
Recline the backrest portion of your seat, fitting cap over top of seat.
Step 3
Take the three straps in center seam of seat cover and pull them (tugging hard) through the break between the seat and backrest. If seat does not allow for center break strap to be pulled through, cut that strap off.
Step 4
Take the front corners of seat cover (in sitting position) and turn them inside out and place them on the seat corners. Keeping seam of seat cover lined up with seam of vehicle's seat, turn (fold) cover back to normal by working your way to center of seat from either corner.
Step 5
Bring backrest upright and tuck in all excess sheepskin into break of seat. (If seat is designed with bottom molding, tuck in excess side skirts of seat cover inside plastic molding).
Step 6
Take shorter center strap and attach to any portion under the seat. Attach metal hooks on long outside straps (one at a time) to hole in white fitting rod provided. Pull rod through under seat to the front.
Step 7
Unclip hooks from fitting rod and connect to 'D' rings located on the front of the seat cover. If 'D' rings are not present, attach elsewhere, avoiding electrical wires.
Step 8
Take remaining straps found on side panels of upper half and lower half of cover and fasten to any attachment under seat. Do not attach to electrical wires.
Step 9
For lowback seats only (seats with an adjustable headrest). You should now have a snug fit and be ready to replace headrests. After locating position of headrest shafts, use a sharp instrument to pierce cover, cutting a small slit from front to back and side to side. Insert headrest poles through cover and into the headrest shafts.